Organization
This book can be read in three different ways. First, it can be read end to end. This is the approach to take if you are curious about VPN technologies in general and want to improve your internetworking skills.
A second way of reading this book is to read a particular chapter or chapters that deals with VPN technologies deployed in your network in advance of problems occurring. This is a good ideaforewarned is forearmed, after all.
Lastly, you can dip into the chapters as and when problems do crop up. Each chapter has been arranged in a manner to facilitate this as much as possible.
As a bonus, a number of troubleshooting labs are included to help you develop and hone your VPN troubleshooting skills. Included on the Cisco Press Web site for this book (www.ciscopress.com/1587051044) are labs for L2F, L2TP version 2, MPLS Layer 3 VPN, and IPSec. Labs for PPTP are not included because Cisco IOS routers support only voluntary tunnel mode, and the list of possible client operating systems is extensive. Labs for L2TP version 3 and Any Transport over MPLS (AToM) are not included because the base platform required for these technologies at the time of writing is the Cisco 7200I don't imagine that many people are lucky enough to have 7200s in their lab!
If and when support for L2TP version 3 and AToM is added to lower-end platforms, I may develop a few labs for these technologies. Check the Cisco Press web site in that case. You may also find one or two extra labs for the other technologies discussed in this book.
The chapters are arranged in the following order:
Chapter 1, "Basic Troubleshooting Methodology"
This chapter introduces a basic end-to-end troubleshooting methodology that is particularly suited to VPNs. Also discussed are the tools and techniques used for troubleshooting these technologies.
Chapter 2, "Troubleshooting Layer Two Forwarding Protocol VPNs"
L2F was one of the first virtual private dialup network technologies to be deployed. This chapter discusses the technology, its configuration, and in-depth troubleshooting techniques.
Chapter 3, "Troubleshooting Point-to-Point Tunneling Protocol VPNs"
The PPTP protocol, configuration, and in-depth troubleshooting are examined in this chapter.
Chapter 4, "Troubleshooting Layer 2 Tunneling Protocol Version 2 VPNs"
L2TP is based on L2F and PPTP. This chapter introduces L2TP, discusses configuration, and goes on to examine in-depth L2TPv2 troubleshooting techniques.
Chapter 5, "Troubleshooting L2TP v3 Based VPNs"
L2TPv3 is a technology that allows the tunneling of not only PPP, but also other Layer 2 protocols, such as Ethernet, HDLC, and Frame Relay. This chapter examines the technology itself, its configuration, and in-depth troubleshooting.
Chapter 6, "Troubleshooting Multiprotocol Label Switching Layer 3 VPNs"
MPLS Layer 3 VPNs are proving to be a very popular technology for service providers and enterprises alike. The technology, its configuration, and in-depth troubleshooting are discussed in this chapter.
Chapter 7, "Troubleshooting Any Transport over MPLS Based VPNs"
AToM can be used to provide transport of Layer 2 protocols such as HDLC, PPP, Frame Relay, and Ethernet over an MPLS backbone. The technology, configuration, and in-depth troubleshooting are examined.
Chapter 8, "Troubleshooting IPSec VPNs"
IPSec VPNs are typically deployed to provide secure VPNs in a site-to-site or remote access configuration. The IPSec technology, configuration, and in-depth troubleshooting are discussed in this chapter.
Appendix A, "Answers to Review Questions"
This appendix includes answers to the review questions provided at the end of each chapter.
Appendix B, "Lab Instructions and Solutions"
The L2F, L2TPv2, MPLS Layer 3 VPN, and IPSec chapters include troubleshooting labs to help readers understand and consolidate concepts and techniques discussed. This appendix explains how lab configuration can be loaded onto lab routers from the Cisco Press Web site (www.ciscopress.com/1587051044) and provides solutions to the labs themselves.
 |
